Skip to Content

Can You Paint Over Drywall Tape? (Read This First!)

Let’s say you painted a wall, but you can still see the drywall tape that was previously applied. Your efforts to paint the wall are in vain due to the error. You are considering options to hide it, and one of them is to just paint the area.

Paint over drywall tape

Drywall tape can be covered with paint. If the tape is visible, it can be quickly hidden, and the technique is simple. However, you must first apply a layer of compound over the tape, followed by primer, and sand the area once it has dried in order to completely conceal the tape.

Drywalls must be taped, and drywall tape is the main component used in this procedure. The drywall tape comes in two varieties. One is a fiberglass mesh tape, while the other is a paper tape.

Paper drywall tape must be put over the wall using mud or compound because it lacks adhesive properties. The fiberglass drywall tape, on the other hand, has a powerful adhesive that occasionally leaves a residue on the drywall.

When applying paper drywall tape, you must first spread a layer of mud, then apply the tape, followed by another layer of mud until the area that has been taped is smooth enough to be painted.

The fiberglass mesh drywall must first be covered with a compound, as this is necessary. Before you begin painting, you need to prepare the surface so that the paint will go on smoothly.

Can you paint directly over drywall tape?

Over drywall tape, you cannot paint directly. Before painting over them, your drywall tape must have a flawless surface.

If you’re using paper drywall tape, you should first spread a layer of mud on the wall because the tape isn’t adhesive. Once the tape is in place, add another layer of compound or mud.

If you can see the tape and think that merely paint will cover it up, you’re mistaken. If the tape is visible, your work is not finished, and extra compound must be applied to the wall.

Although the fiberglass mesh drywall includes adhesive, it cannot be painted over immediately. It is also necessary to seal with compound beforehand. If it is no longer visible, proceed to the next step of painting over it.

What happens if you paint over drywall tape?

Painting directly on top of drywall tape is not a viable option. If you paint over the drywall tape, you run the risk of a number of different problems, including the following:

Visible Imperfection:

You must keep in mind that painting over a wall with defects makes it more obvious. The drywall tape serves only as the mud’s foundation. The wall would appear unfinished if the tape is painted over directly with paint.

Mediocre Results:

Directly painting over drywall tape will result in an uneven, sketchy appearance, which is probably not what you want.

Additionally, this is not the proper manner to apply tape. The tape may become loose after a few days of application, in that case you may need to repeat all the processes.

It is best to follow specific steps in order to cover drywall tape in an appropriate manner. So the wall has a very pleasing appearance.

How do you paint over drywall tape?

If the drywall tape on your wall can still be seen after the paint has dried, then the wall needs additional coverage. When working with drywall tapes, there are certain procedures that must be followed.

Gathering Equipment:

Gather the necessary tools before starting the process. You will need a brush, water-based primer, the same color you used on the entire wall, ready-mixed joint compound, a putty knife or other applicator and sand paper.

Using Compound or Mud:

To cover the tape area, compound is required. Use the pre-mixed one you purchased at the store. The mud solution can also be used on paper drywall tape. You must decide which will give you a flawless wall finish.

Thin Out the Compound:

To thin out the compound, add water now. With a putty knife, continue blending the mixture while gradually adding water. You need a thick paste or batter. It can’t be too thick or too runny.

Spreading Compound Layer:

Now sprinkle a tiny amount of the combined compound directly over the tape and spread it slowly using your putty knife or a similar tool.

Give the area a flawless appearance. Use something that you can readily bend. It would be simpler to spread and conceal the tape in this manner.

Perfecting the Layer:

Making a thin layer is what you’ll be attempting. In order to make the coating as flawless as possible, run any excess over the surface. The layer will become thin after doing this multiple times. The specified area shouldn’t have any bumps.

Leaving the Compound to Dry:

When the layering is to your satisfaction, let the compound dry. Observe the precise time specified in the package. Most of the time, you’ll need to rest it for a day. Before sanding the compound, it must thoroughly dry.

After the recommended amount of time, gently touch the region. You can proceed to the following step if it has completely dried.

Sanding the Compound Layer:

To make the compound smoother, lightly rub it with a piece of 150-grit sand paper or a sanding block. No need to go overboard. Simply level it out and remove the seams to complete the task.

Using Water Based Primer:

Applying primer over drywall tape is crucial. You should first consider whether you have access to a water-based primer. For this task, avoid using an oil-based primer because it won’t dry over the drywall tape. Apply a primer made of water.

Applying Multiple Coats:

It is essential to prepare the surface in a comprehensive manner. Applying a single layer of primer is insufficient; instead, you should apply numerous coats of primer and take your time doing so.

Leaving the Primer to Dry:

To finish, you rest the primer. Depending on the primer type and the number of coats needed to completely cover the tape, this will take a few hours. Bone dryness is the ideal state. Don’t rush things and paint over it. It could produce a bumpy-looking area.

Adding Paint Layer:

Apply the same paint you did to the remainder of the wall. Use a paintbrush to apply a thin coating over the dried layer of primer after pouring some into a paint tray.

Sometimes one coat will suffice, but you must search thoroughly for numerous coats. Matte paints typically cover regions more visibly.

Repeating Paint Layers:

The paint’s drying time can be found in the manufacturer’s description. Follow up with several coats of paint if the priming and tape are still just barely perceptible.

That should completely conceal the drywall tape and make it disappear into the background of your wall.

If you follow these procedures, you will be able to conceal the area covered by the tape deftly. You simply need to be patient throughout the process and make an effort to complete the process in a noticeable manner.

2 ways to cover drywall paint

Adjacent drywall sheets can be bonded together by using drywall tape. By doing this, continuity is created and motion or cracking is lessened. If you don’t use tape to reinforce it, joint compound can become powder.

There are only a few options for concealing the drywall tape, including

Using Paint:

Simply paint over it to cover it. However, you must first prepare the place. To paint over a surface, it must be completely flawless. A layer of compound followed by a primer will smooth out the surface.

But to work with it, you must have patience. It takes a while since the compound and primer must completely dry before they can be blended together to appear great. However, the outcome will undoubtedly be excellent.

Hanging an Object:

Your best option would be to use paint. However, if you’re short on time and need to quickly conceal the flaw, all you need to do is grab an item and hang it over the problem area.

Your favorite things could be depicted in a painting or photograph, or it could be a homemade item.

Drywall tape is an object that is used in the process that is being described. If it is visible, just keep in mind that the wall needs additional work, and you can cover it up with paint if it is visible.

Final Thoughts

You may just paint over the drywall tape to conceal it. But direct painting cannot be done on tape. Compound must be applied first, followed by primer, and then paint can be applied. There are two kinds of drywall tape: fiberglass mesh tape and paper tape. For both tapes, the procedure is similar.